Scanner not recognized

Moderator: jsachs

Ilan
Posts: 7
Joined: April 24th, 2009, 10:03 am

Scanner not recognized

Postby Ilan » November 12th, 2011, 6:24 am

There seems to be a problem to import images from a scanner. The menu option "File -> Select Scanner" brings up am empty list. The option "File -> Aquire (Scan) ..." results in an error message. I am using PWP 6 64 v.0.6 Beta. With PWP 5 scanning works fine. The scanner I use is HP Photosmart C4283.

ksinkel
Posts: 593
Joined: April 2nd, 2009, 11:58 am
Contact:

Re: Scanner not recognized

Postby ksinkel » November 12th, 2011, 11:17 am

The short answer is that PWP 6/64 runs 64 bit Twain and requires 64 bit scanner drivers. The reason File/Select Source shows no scanners is that you have no 64 bit drivers installed. I wish I could just point you to your scanner web site and say download the 64 bit driver. However scanner manufacturers have been slow in providing such drivers and almost certainly such a driver is not available. (Of course, there is no harm in checking.) We are investigating a bridge to 32 bit Twain drivers but are uncertain at this point of the feasibility and timing of that solution or even its longer-term need. In the meantime, you can scan using your scanner's own software or by using PWP 6/32 which can be installed side by side with PWP 6/64.

Kiril
Kiril Sinkel
Digital Light & Color

MikeG
Posts: 241
Joined: April 25th, 2009, 4:36 pm
What is the make/model of your primary camera?: Panasonic G1
Location: Sydney, Australia

Re: Scanner not recognized

Postby MikeG » November 12th, 2011, 5:21 pm

When I moved to 64bit the scanning software supplied by Epson for my Perfection 3200 Photo no longer worked and the only solution that I could find was to (buy and) install Vuescan.
It is available here: http://www.hamrick.com/
It took a little getting used to, but it works well.
Mike.

ksinkel
Posts: 593
Joined: April 2nd, 2009, 11:58 am
Contact:

Re: Scanner not recognized

Postby ksinkel » November 13th, 2011, 12:05 am

As I mentiond above, PWP 6/32 bit will also work with 32 bit scanner drivers. I keep both 64 and 32 bit versions installed on my Windows 7 machine and use the 32 bit version when I need to scan.

Kiirl
Kiril Sinkel
Digital Light & Color


Return to “PWP 6 Beta Comments”

Who is online

Users browsing this forum: No registered users and 1 guest