Clarity

Moderator: jsachs

Post Reply
AHuntley
Posts: 51
Joined: September 1st, 2012, 3:32 pm
What is the make/model of your primary camera?: unknown

Clarity

Post by AHuntley »

Hello All,

Other than a high radius / low amount USM pass, is there any other way in PWP7 to mimic Clarity like in Lightroom?

Thank you.
Regards,
AlanH
jsachs
Posts: 4203
Joined: January 22nd, 2009, 11:03 pm

Re: Clarity

Post by jsachs »

It appears to be a combination of sharpening and midtone contrast enhancement. You can do a midtone contrast boost by applying an S-shaped curve with the Brightness Curve transformation or using the Contrast slide in the Levels and Color transformation.
Jonathan Sachs
Digital Light & Color
AHuntley
Posts: 51
Joined: September 1st, 2012, 3:32 pm
What is the make/model of your primary camera?: unknown

Re: Clarity

Post by AHuntley »

Hello Jonathan,

Thanks for the suggestion.

I do agree that clarity is some combination of mid-tone contrast boost along with some sharpening, but it's generally targeted mostly at the mid-tones. Therefore, not sure a general S-shape curve or any global contrast slider will provide the same result. For all the years I've used PWP I've typically applied a high radius / low amount USM pass through a mask attempting to target the mid-tone range. This does work pretty well. However, I thought with all the recent advancements leading to today's version there may be a better way. As a matter of fact, as I type this I'm thinking that the 3-Zone Adjustment transformation via the mid-tone tab and careful adjustment of the tonal range affected may give me a better result. Gonna have to play with that...

Thanks, again.
Regards,
AlanH
den
Posts: 856
Joined: April 25th, 2009, 6:33 pm
What is the make/model of your primary camera?: Canon EOS-350D/Fuji X100T
Location: Birch Bay near Blaine, WA USA

Re: Clarity

Post by den »

You might also want to investigate the Advanced Sharpen-Sharpen transform with Sharpen Radius ranges 5 to 10 while limiting increased contrasts to medium detail (mid-frequencies) with the Lower and Upper Threshold settings available as of PWP v7.0.13... ...see: http://www.dl-c.com/board/viewtopic.php ... 4923#p4923...

...den...
AHuntley
Posts: 51
Joined: September 1st, 2012, 3:32 pm
What is the make/model of your primary camera?: unknown

Re: Clarity

Post by AHuntley »

Hello den,

Thanks for the tip and link to the suggested technique. I will definitely give this a whirl...
Regards,
AlanH
Post Reply