Page 1 of 1

Saved script Multi Color Balance settings do not auto-Reset

Posted: August 10th, 2018, 2:20 pm
by den
...
Ref: msi 180809-5

I will use the Multi Color Balance transform default settings for removing color casts from the Black and White points with expansion for full range... ...but... the transform initial settings when used in a Saved, then Loaded script are not auto-reseting for each script update or input image change...

Before transform Reset:
MultiClrBal initial script settings.jpg
MultiClrBal initial script settings.jpg (231.13 KiB) Viewed 1094 times
image 2 Command info before Reset:
multi_color_balance 0 npts 2 white 2 black 2 probesize 1 curpt 1 amount 1 -1 0 0 ″Amount: ″ ″Mask″ display 2 sync_scroll 1 auto_preview 1 enable1 1 inconsistent1 0 src1 0 dst1 0 enable2 1 inconsistent2 0 src2 fefefd dst2 ffffff

After transform manual Reset:
MultiClrBal after Reset settings.jpg
MultiClrBal after Reset settings.jpg (226.79 KiB) Viewed 1094 times
image 2 Command info after Reset:
multi_color_balance 0 npts 2 white 2 black 2 probesize 1 curpt 1 amount 1 -1 0 0 ″Amount: ″ ″Mask″ display 2 sync_scroll 1 auto_preview 1 enable1 1 inconsistent1 0 src1 11120e dst1 0 enable2 1 inconsistent2 0 src2 ffffff dst2 ffffff

The Script see the post here: viewtopic.php?f=11&t=1655#p7262

Also: transform Settings - Save As Default Settings and Clear Default Settings do not seem to work properly... ...Clear Default Settings remains continuously gray-ed out...

When the transform is used as a new addition to a un-saved script or Browser image, it seems to auto-Reset as expected.

...den...

Re: Saved script Multi Color Balance settings do not auto-Reset

Posted: August 10th, 2018, 3:27 pm
by jsachs
Fixed for next release